Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?
SmartSDR v4.1.3 | SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

DStar Not Transmitting Call Sign Data

W9WLX_Chuck
W9WLX_Chuck Member ✭✭
edited November 2016 in SmartSDR for Windows

I have been running DStar on my Flex 6500 and I noticed that after upgrading from 1.5 to 1.6, it was no long transmitting my call sign with the data stream.  Only my message would show up in the data stream.  Other Flex DStar users were not experiencing the problem.

After trying a reinstall, a factory reset of the Flex, and a few other variations, I discovered the problem.  My mic protocol for DStar was setting the transmit bandwidth low cut filter at 100.  It seems that the low cut filter needs to be set to 0 in order for the call sign data to be in the data stream.  The message data was unaffected at 100.  Above 100, the message data becomes corrupt and at 600 is no longer transmitted.  My DStar mic protocols have been updated!

-73, Chuck, W9WLX

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories