Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
The latest SmartSDR Software:
SmartSDR v4.1.5 | SmartSDR v4.1.5 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software:
The latest 4O3A Genius Product Software and Firmware
How to Receive Technical Support::
If you are needing assistance with FlexRadio products, please refer to the product documentation or check the Help Center for known solutions. Need technical support from FlexRadio? It's as simple as creating a HelpDesk ticket.

My 6700 power output is less than expected

2»

Answers

  • KY6LA_Howard
    KY6LA_Howard Member ✭✭✭
    edited January 2017
    1.4 will be out when they release it into the wild!!!
  • Steve W6SDM
    Steve W6SDM Member ✭✭✭
    edited December 2014
    I use DDUtil to monitor my voltage and temperature.  It's not as accurate as measuring at the back panel with a good multi-meter, but it will give you a constant readout.  If you have a bad power cable or connection, you will see it.  You will also see how much of a drop you get when you're rig draws current when being keyed.  Once when I was experiencing strange problems with my 5000, I ended up replacing a faulty power supply once I realized what was happening.

    It would be nice if the voltage and temp showed up somewhere on the main form of SSDR.


  • Ed.G
    Ed.G FlexRadio Employee ✭✭
    edited December 2016
    In v1.3.8 there is a bug in the TX Signal Chain that results in 0.5dB of attenuation. This is an initialization problem within the Hardware ALC attenuator. For v1.3.8, If you enable the Hardware ALC, it is possible that this will reset the offending attenuator and you should get full 100 Watts out.   This bug is fixed in v1.4.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories