Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?

SmartSDR v3.10.10 and the SmartSDR v3.10.10 Release Notes
SmartSDR v2.12.1 and the SmartSDR v2.12.1 Release Notes

The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Low power on 10 mtrs

WA6FXT Mike
WA6FXT Mike Member ✭✭
edited May 2020 in FLEX-6000 Signature Series
Operating on 10 mtrs, for the first time, I noticed that maximum power is only about 70 watts. I verified the output on my Daiwa meter and it matches the Flex6700 indication. I have not checked all bands; however, 40 and 20 mtrs will output 100 watts. Any ideas?
Tagged:

Comments

  • Stu Phillips - K6TU
    Stu Phillips - K6TU Member ✭✭
    edited May 2020
    Mike, No problems with my unit - full power on all bands. Forgive the obvious question but have you tried checking the SWR or using the ATU to see whether that helps? Stu K6TU
  • WA6FXT Mike
    WA6FXT Mike Member ✭✭
    edited June 2017
    No problem, Stu. SWR 1.2:1 and the ATU does not help.
  • Dudley-WA5QPZ
    Dudley-WA5QPZ Inactive Employee
    edited March 2018
    Check the total current draw on 10 meter in tune at full power verses the other bands. If the current drawnn at 100 %. Output is less on 10 meters as compared to the other bands, say 15 then it might be a calibration issue, but if the total current is about the same, maybe be in the PA filtering .. Let us know on the Help Desk .

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories