Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.

Need the latest SmartSDR or 4O3A Genius Product Software?
SmartSDR v4.1.3 | SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes

---

The latest 4O3A Genius Product Software and Firmware

If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Mike-VA3MW admin

• Activity
• Posts1.1K
• Comments6.1K

• Re: ESC funtion- curious findings

  Mike-VA3MW

  January 6
  Hi John We just found this bug as well and it will likely be fixed by 4.2 (SMART-12136). Thanks for your detailed report. Mike
  1

• Re: Just set up my 510. appears to be DOA. Won't power on. Am I missing anything?

  Mike-VA3MW

  January 12
  check the power switch on the back of the radio. Make sure it is on.
  1

• Re: How to connect LOG4OM to remote 8400 using SmartSDR/CAT using hamlib

  Mike-VA3MW

  January 9
  Hi Steve If you works locally, the setup is identical for remote. You start CAT on the same computer as LOG4OM and let CAT do the SmartLink connection to the radio. Now that you have that CAT port, y…
  1

• Re: UPS Recommendations for use with Aurora

  Mike-VA3MW

  January 8
  The issue isn't the sine wave as much as it is the ability to provide surge power. The 2 - 48 volt power supplies in the radio are made by MeanWell. You also want to make sure you UPS does not p…
  2

• Re: UPS Recommendations for use with Aurora

  Mike-VA3MW

  January 8
  We have not tested nor do we plan to test any UPS devices. There are just too many variables and not enough hours in the day. I can tell you that at 500 watts, the unit draws just over 6A @ 120VAC. P…
  1

Next