Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?
SmartSDR v4.1.3 | SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software and Firmware
SmartSDR v4.1.3 | SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.
-
Re: Maestro C - Microphones with TS Mic plug + CTIA Y Cable.
Hi Russ tldr; replace the TS connector on the Heil mic lead with a TRS connector A CTIA Y cable works well with Microphones with a TRS (stereo) Mic plug. Some Mics (such as Heil) have a TS (mono) Mic…0 -
Re: Powering Remote PGXL, TGXL
Remotely, I always suggest you are able to run off and on things for remote debugging/rebooting. The TGXL actually wants a voltage higher than 15V (it says 15V on it). When supplied with less and a s…-1 -
Re: *** Planned SmartLink Outage *** October 3rd, 2023
The upgrades to the SmartLink servers is now complete and we are back online. You may have to re-login and/or reboot your radio to complete the process. SmartLink only functions on v2.10.1 or v3.5.9 …3 -
Re: SmartLink crashing at connection?
You should be able to connect using LAN IP on a site to site VPN as long as it accommodates Layer 2 communications and is on the same subnet. Or, you could spoof the broadcast messages and do your ow…-1 -
Re: September 11 - 2023 - SmartLink Outage
Wednesday AM Update: The new V2 and V3 builds of SmartSDR regression and Alpha testing are working well with the required changes. The fixes in these builds will allow the use of SmartLink again. Hop…9
