Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?
SmartSDR v4.1.3 | SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software and Firmware
SmartSDR v4.1.3 | SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.
-
Re: Connect HRD Logbook with Slicemaster?
I now have my HRD logbook connected via SliceMaster It works wonderfully.1 -
Re: Most recommended mic
I used a Koss SB-45 all weekend with great audio reports. For $50 is was good value. Before you toss all your Mics, make sure you are never overdriving the radio. Your Audio Level meter should be -5d…1 -
Re: SmartSDR V1 on Windows 11: Audio dropouts and loud pops
The vox issue is now fixed and it should be in 3.4 assuming it passes all Q/A testing. 732 -
Re: Custom Bands
Try this (off the top of my head) Let's assume ANT 1 - 80M Dipole ANT 2 - 4 Square Next, define your operating range or bands. I have an 80M High and 80M Low and I have a hard cut over at 3650, …2 -
N1MM via IP Addressing -- dump the com port
If you are TCP/IP savy, you might want to give this a try for N1MM. The Port numbers for each function must match the port number CAT and they must all be unique and not used by some other process. T…1
