Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?
SmartSDR v4.1.3 | SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software and Firmware
SmartSDR v4.1.3 | SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.
-
Re: Zerotier Layer 2 Bridge for Flex Radio Remote Operation
Thanks for posting this Mike. As noted in the document, if you create a new account at zerotier.com and use the New Central Web UI, please send me the screen shots of the pertinent settings section i…1 -
Re: TGXL PTT (yet again)
The best solution I have found is to have the TGXL use LAN for PTT, connect the TGXL PTT OUT to the PTT IN of the amplifier and the footswitch connected to the PTT IN on the 6600. If I want to be abl…1 -
License Required abend
I was in the middle of a digital VarAC QSO and SmartSDR terminated all by itself. The Power button on the 6600 was OFF, no color, and was unresponsive to power it off. I pulled the DC, waited 2 minut…1 -
Re: Ability to configure the TX1 TX2 TX3 RCA jacks for TUNE only
Yes please! I'm using transmit profiles to enable/disable the PTT to my linear while tuning. FRStack works for this but I'd rather not have an extra software package installed JUST for that…1 -
Electret mic wiring
I have a Koss SB45 (has an electret condeser mic). Can the mic be wired directly to the Foster connector (pin 2 bias to ring, pin 7 to sleeve, pin 8 to tip)? Or must I add the current limiting resist…1
