Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Erika - KØDD ✭✭✭

  • Re: Noise Floor - FLEX 6400

    I believe he was suggesting go to the panel and flip all the breakers off... see if you still have the noise... hope you can find it in your house it a real hassle getting neighbors to cooperate. I h…
  • Re: Noise Floor - FLEX 6400

    Doubtfull its the dell. But holy moly thats a lot of noise. The only time I see that is with tstorms overhead. Thats got to be making a real racket in the audio. Where's the agc t set?
  • Re: transmit audio

    I bought an inrad m629 and after chasing every XLR connector in my audio line for correct pinouts, it turned out two pins in the mic connector itself were soldered up swapped. I had nasty hum. Shure …
  • Re: New FlexRadio owner

    Congratulations on the 6700, that should take good care of you. As far as the BBQ Antenna goes, That's one step below my fresh out of college 1970 Road Runner backed up to the parking space outside o…
  • Re: Aviation Headsets - any use?

    The headset part works great. I used one for a decade. The problem is aviation radios utilize carbon microphones originally. Like old dial telephones... it requires like 1.5vdc on the elements to bia…