Youtube video for fldigi and flex

  • 2
  • Idea
  • Updated 3 years ago
Hey all

As promised, I have created and uploaded a video on getting fldigi and FlexRadio signature series radios to play nice with each other.


You can find this on my Youtube channel at:


https://youtu.be/IVOhj244e30


The Youtube channel is called Divide by Zero Productions, and I will perhaps have more videos as time goes on.


Perhaps even the dreaded Windows 10 soundcard driver issue..........


- 73 Mike N3LI- 
Photo of Michael Coslo

Michael Coslo

  • 786 Posts
  • 183 Reply Likes

Posted 3 years ago

  • 2
Photo of Jim W3IPO

Jim W3IPO

  • 32 Posts
  • 5 Reply Likes
Mike,
Excellent video and audio.  Great information.  The production is top notch. 
"Divide by Zero" is the best title!!
Thank you.
73
jim
Photo of Mark Erbaugh

Mark Erbaugh

  • 379 Posts
  • 34 Reply Likes
Thanks for the video. Have you been able to get FLDIGI to transmit CW?
Photo of Michael Coslo

Michael Coslo

  • 786 Posts
  • 183 Reply Likes
I've used a CW QSK signal on right channel  on the Right Channel tab of the configuration menu.
Photo of Michael Coslo

Michael Coslo

  • 786 Posts
  • 183 Reply Likes
Hi Mark - another update on CW fldigi and Flex.


I find that I must increase the audio level in DAX to get a decent decode in fldigi. Much higher than I need for any other modes. The green signal strangth bar at the right hand side of the fldigi window hardly registers on CW otherwise. Definitely an fldigi issue. I'm going to consult with Dave W1HKJ to see if this is a known issue. It isn't a huge problem, but a bit of a nuisance.
Photo of Mark Erbaugh

Mark Erbaugh

  • 379 Posts
  • 34 Reply Likes
How does the QSK signal work? Do you have to use external hardware? Is the Flex in CW mode or is FLDIGI generating tones?
Photo of Michael Coslo

Michael Coslo

  • 786 Posts
  • 183 Reply Likes
This is a tone generation method for CW. No external equipment needed.
Photo of IW7DMH, Enzo

IW7DMH, Enzo

  • 353 Posts
  • 84 Reply Likes
Great demonstration!

Thank you very much.
Photo of Bob G   W1GLV

Bob G W1GLV

  • 647 Posts
  • 107 Reply Likes
Nice job illustrating the process of seting up.