WSJTX Log Upload to LOTW

  • 1
  • Question
  • Updated 2 years ago
  • Answered
Running a Flex 6300 with HRD.  Have not had any issues since the beginning with this setup.  I recently setup WSJTX so I could run FT8.  After some pesky troubles I finally got it working.  My problem is with logging and uploading my HRD log to LOTW.  The procedure I have been using is log the QSOs with WSJTX and then import the WSJTX log file into HRD log book and it takes it all OK,  Here's the issue.  When I try to upload the QSOs (in the HRD Log) to LOTW that were logged by WSJTX I get the following message:"Failed to sign ADFI with TQSL.  See log file for more info" .  Where in heck is the Log File?  I have loaded and setup JTalert with the same results.  QSOs logged directly with HRD upload just fine.  Has anybody run into this or have some ideas?  TNX Al W1JHU
Photo of Al Reeves

Al Reeves

  • 50 Posts
  • 4 Reply Likes

Posted 2 years ago

  • 1
Photo of KY6LA - Howard

KY6LA - Howard, Elmer

  • 3799 Posts
  • 1658 Reply Likes
Official Response
You are likelyusing an. Older version of TQSL which does. Not recognize FT8