WSJT-X Unable to transmit

  • 1
  • Question
  • Updated 3 years ago
  • Answered
I have WSJT-X 1.7 configured to connect and work with SmartSDR 1.10.15 and a 6700

When WSJT-X goes in to transmit mode:
  • 6700 keys up (green LED goes red)
  • DAX Control Panel TX button is Blue and the meter is showing audio present 
  • SmartSDR P/CW panel shows the correct level i.e. right carat just below 0 and audio on the level meter, DAX button blue
  • If I turn on monitor I can hear the JT65 tones
However, I am getting zero RF power not matter to what I set the RF Level in SmartSDR

Some smart SDR info: Mode is DIGU (I also tried USB), Passband 3K

Note I can transmit no problem using my PR-781

I have rebooted both computer and radio multiple time

Any help appreciated


Photo of W9TVX


  • 57 Posts
  • 25 Reply Likes

Posted 3 years ago

  • 1
Photo of Bill W2PKY

Bill W2PKY

  • 552 Posts
  • 96 Reply Likes
Official Response
Check the Low and High Cut settings, should be 0-4000