TX1 Keeps Disabling Itself.

  • 1
  • Problem
  • Updated 4 years ago
  • Solved
The TX1 keeps disabling on its own from time causing amplifier problems. When it does disable itself, it doesn't matter if I change the keying line to TX2 or TX3, they still don't key. I cannot predict when this happens yet. I'm using the 6700 with a 2K-FA amplifier.
Photo of W5UN_Dave

W5UN_Dave

  • 316 Posts
  • 30 Reply Likes

Posted 4 years ago

  • 1
Photo of W5UN_Dave

W5UN_Dave

  • 316 Posts
  • 30 Reply Likes
Official Response
Thanks for all the replies to this problem. DDutil was definitely the culprit. To cure it I had to check "Manual TX" under the AutoDrive tab