Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?
SmartSDR v4.1.5 | SmartSDR v4.1.5 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

TX Delay and Time Out settings in the Transmit section of the 6600M for use with a PGXL

W5AP
W5AP Member
edited September 2019 in Power Genius XL Amplifier
The PGXL manual states "When driving the amplifier with a FLEX-6000 Series transceiver, set the TX Delay to 10 ms or more. Both the LAN and PTT keying outputs to the amplifier are modified by this setting. See the SmartSDR Software User Guide, the Maestro User Guide or the FLEX-6400M / FLEX-6600M User Guide for information about setting TX Delay."

However, the Transmit section of the 6600M using HW Ver:3.0.27.131 has a TX Delay (to be set = or > 10) but also has a "Time Out(min)" box - which is not described in any User Guide. 

Does anyone know the "Time Out(min)"  purpose or setting with a PGXL amp?

Answers

  • Gene Duprey
    Gene Duprey Member ✭✭
    edited September 2019
    I just set the TX1 to 30 msec., I do not know about the other parameter.
  • David-N5PSM
    David-N5PSM Member ✭✭
    edited September 2019
    It is just a TOT  "Time Out Timer" for maximum continuous key-down or talk time,  just like on an HT

    3 minutes is typical........if something should fail and key the transmit,,,,,   such as my cat deciding that the foot-switch would be interesting to lay on......HIHI
  • W5AP
    W5AP Member
    edited September 2019
    That makes sense
    Thanks for the reply

    Jim

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories