SmartSDR&Flexcontrol knob

  • 1
  • Question
  • Updated 5 years ago
  • Answered
Is it possible to retune frequencies in the Flex 6700 Flex control knob with DDUTIL? I failed to realize.
Slawomir
Photo of Slawomir

Slawomir

  • 16 Posts
  • 0 Reply Likes

Posted 5 years ago

  • 1
Photo of Sergey, R5AU

Sergey, R5AU

  • 809 Posts
  • 97 Reply Likes
Sure:
1. Start SSDR
2. Disable FlexControl in SSDR
3. Start DDutil
4. Programming DDUtil v3 with port allocated with FlexControl (see you Device Manager in Win)
5. Activate check box FlexControl in DDUtil
-> completed
at next start you skip 2&4&5
Photo of Slawomir

Slawomir

  • 16 Posts
  • 0 Reply Likes
Sergey,
how do I disable the Flex control in the SSDR if I do not have control Flex? Maybe you have a different version of the software?
Slawomir
Photo of Robert -- N5IKD

Robert -- N5IKD, Elmer

  • 488 Posts
  • 152 Reply Likes
There is a settings menu in the top left corner, then choose Radio setup and then the General tab.

Settings > Radio Setup > General
Photo of Slawomir

Slawomir

  • 16 Posts
  • 0 Reply Likes
Hi Robert,
Thanks to your help. Tunable FVO is already running. Did it work when you configure the AUX function?
Slawomir
Photo of Sergey, R5AU

Sergey, R5AU

  • 809 Posts
  • 97 Reply Likes
Slawomir, i am not sure, but what does it mean AUX function in you case ?
Photo of Michael - N5TGL

Michael - N5TGL

  • 307 Posts
  • 101 Reply Likes
I can get DDUTIL running fine with the radio, the problem I have is that when the slice receiver reaches the edge of the panadapter, the panadapter doesn't scroll, the slice receiver just disappears right off the screen.
Photo of Sergey, R5AU

Sergey, R5AU

  • 809 Posts
  • 97 Reply Likes
Hi Michael, i will check it today later on, not sure but or in direct Flexcontrol connenction to the SSDR or with tuning with mouse weel, Panadapter scrolling.
Unfortunately this is not working with CAT commands (ex. with DX cluster)
Photo of Michael - N5TGL

Michael - N5TGL

  • 307 Posts
  • 101 Reply Likes
Agreed, I have the same problem with changing frequency via CAT.
Photo of Slawomir

Slawomir

  • 16 Posts
  • 0 Reply Likes
Hi Sergey,
I think the other functions assigned to AUX1, AUX2 and AUX3.
Photo of Sergey, R5AU

Sergey, R5AU

  • 809 Posts
  • 97 Reply Likes
Clear Slawomir, this buttons not yet fully supported in DDUtil but partly, pls read completely page http://k5fr.com/DDUtilV3wiki/index.ph...

Michael, with mouse wheel tuning Panadapter scrolling follow with slice RX, but not with F.C. and CAT commands
Photo of Slawomir

Slawomir

  • 16 Posts
  • 0 Reply Likes
Sergey Thank you for your help. Slowly recognize opportunities DDutil + Flexcontrol.
73's