SmartSDR for iOS v1.2 crashing

  • 1
  • Problem
  • Updated 2 years ago
  • Solved
Hi there,

I've updated to the latest version of SmartSDR for iOS some days ago. Every time after the discovery of the radio when the panafall is coming up the app just disappears without any message.. The previous version was running ok.. 

Flex-6300, iPad Air 2, SmartSDR 1.10.16 on the radio

I did not try the previous version of the iOS app with the new SmartSDR release so I can't say if the update to SmartSDR 1.10.16 or the update to SSDR iOS 1.2 is responsible for the problem..

Thanks and 73
Mario, DL3LSM
Photo of Mario - DL3LSM

Mario - DL3LSM

  • 63 Posts
  • 23 Reply Likes

Posted 2 years ago

  • 1
Photo of Mario - DL3LSM

Mario - DL3LSM

  • 63 Posts
  • 23 Reply Likes
I forgot: iOS 10.2.1
Photo of Marcus - DL8MRE

Marcus - DL8MRE

  • 144 Posts
  • 40 Reply Likes
Hi Mario,

can you please try to delete the App from your device and Re-Install from the App Store please.

Thank you,

vy 73,
Marcus, DL8MRE
Photo of Mario - DL3LSM

Mario - DL3LSM

  • 63 Posts
  • 23 Reply Likes
Hi Marcus,

I deleted and re-installed the App.. It worked until I changed band (from the left menu).. Then it disappeared again and now it's the same as before - it disappears right after the panafal comes up..

Thanks and 73
Mario, DL3LSM
Photo of Mario - DL3LSM

Mario - DL3LSM

  • 63 Posts
  • 23 Reply Likes
After some minutes on the phone (thanks Marcus, great support) we decided to do a reset of the Flex-6300 (pressing and holding the power button). This solved the problem..

Thanks and 73
Mario, DL3LSM