sensitivity spec not published

  • 1
  • Question
  • Updated 2 years ago
  • Answered
Most other radios publish a sensitivity spec -- usually in the range of .2uV or below for the HF bands.  I notice on the spec sheets for the FLEX 6000 series that this spec is not provided.  Yet Sherwood measured it at .25uV.

Is this because there is some 'environmental specificity' (i.e. settings adjustments) that affect the sensitivity of the recievers?  or is the .25uV rating just not something Flex wants to necessarily publish?
Photo of VE7ATJ

VE7ATJ

  • 124 Posts
  • 22 Reply Likes

Posted 2 years ago

  • 1
Photo of Walt

Walt

  • 236 Posts
  • 75 Reply Likes
Official Response
Flex-6000 Hardware Reference Manual - page 15 - Section 4.3 Receiver specs - lists the Sensitivity of all three radios.

you will need to do a download of the document.

cheers