Pops and snaps in Maestro audio after upgrade to 2.1.32

  • 2
  • Question
  • Updated 4 months ago
  • Answered
I upgraded to SSDR 2.1.32 and all is well except when accessing the Flex 6500 with the Maestro I notice random snaps and pops in the audio, whether transmitting or receiving. I manually uninstalled and reinstalled the DAX software and the audio from the PC is good, but the Maestro snaps did not change. Ideas?
Photo of John Holmes

John Holmes

  • 37 Posts
  • 2 Reply Likes

Posted 4 months ago

  • 2
Photo of John Holmes

John Holmes

  • 37 Posts
  • 2 Reply Likes
Official Response
The health is excellent with RTT latency about 2 or 3 ms. However the latency jumps up to 30 or 40 ms when I change the RX frequency. No packet loss shown.This is using a  5GHz link. I am now trying with 2.4 to see if 5 is causing the problem. Apparently that was it. After changing to 2.4 all was OK and then back to 5 and all is OK there, too! Thanks for the info.