Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?

SmartSDR v4.1.3 and the SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 and the SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Picture of the rear of the 6600M

Robert Lonn
Robert Lonn Member ✭✭
edited December 2019 in FLEX-6000 Signature Series
Can someone post a picture of what the rear of the 6600M PRODUCTION unit looks like please. The picture on Flex web site is a old prototype picture, looking at what the finished production models look like, thanks

Answers

  • Jean Drolet
    Jean Drolet Member ✭✭
    edited April 2018
    inside picture or outside ?
  • Robert Lonn
    Robert Lonn Member ✭✭
    edited April 2018
    Outside, Back Picture..
  • Ted VE3TRQ
    Ted VE3TRQ Member ✭✭✭
    edited December 2019
    Here's the back of my 6600M, complete with all the temporary hookups :-)image
  • Robert Lonn
    Robert Lonn Member ✭✭
    edited December 2019
    Thanks Ted, looks GREAT!!!!!! Can the 10 MHz output be switched to accept a 10MHz INPUT from an external GPS reference??? 
  • Craig_KØCF
    Craig_KØCF Member ✭✭✭
    edited April 2018
    No, but if you look you will see that there is a separate 10MHz input.

    73,
    Craig, KØCF
  • Ted VE3TRQ
    Ted VE3TRQ Member ✭✭✭
    edited April 2018
    It's the phono jack next to Tx3. Too bad it's not a BNC :-(
  • Robert Lonn
    Robert Lonn Member ✭✭
    edited April 2018
    OK, I see it now..  BNC or TNC, I have a BNC to RCA Phono, so it should work fine.
  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited April 2018
    The website has been updated with rear panel pictures of the production 6400M and 6600M

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories