New heatsinks not touching chip surface and fall of again.

  • 1
  • Problem
  • Updated 3 months ago
I executed the heatsink modification according instructions.
The 2 old ones were both lying on the bottom.
Then I glued the new ones on top of the chips and pressed gently. Done?
I started to close the case but suddenly one of the heatsinks fell of again!
After closely investigating I noticed that some surrounding SMD parts are (L2, L3, C11) higher then the surface of the chip! In other words it is not possible to mount the heatsink in such a way that it touches the chip.
The only solution is to cut the new heatsink to fit the chip.
Do I have different pc boards or why did not anybody else has this problem? What I‘m doing wrong?
Chris
DJ2NL
Photo of Chris de Voogd

Chris de Voogd

  • 14 Posts
  • 2 Reply Likes

Posted 3 months ago

  • 1
Photo of Manuel Maseda

Manuel Maseda

  • 13 Posts
  • 1 Reply Like
The new heatsinks go on the back of the board, not on top of the chips.
Photo of Chris de Voogd

Chris de Voogd

  • 14 Posts
  • 2 Reply Likes
Stupid me, thanks.
Photo of Albert PA0A

Albert PA0A

  • 15 Posts
  • 2 Reply Likes
Oops
Photo of Art - N4QNT

Art - N4QNT

  • 40 Posts
  • 9 Reply Likes
Please watch this How-To Video>>>>>>>> https://www.youtube.com/watch?v=cKKkFkhmFps
Photo of WX7Y

WX7Y

  • 536 Posts
  • 98 Reply Likes
The pictures on the included instruction sheet show the proper placement of the heat sinks on the back of the Circuit board. 
Photo of rjguidrysr

rjguidrysr

  • 52 Posts
  • 7 Reply Likes
completed in 15 minutes, takes more to get those 14 little screws out and back.
Photo of Wayne

Wayne

  • 614 Posts
  • 84 Reply Likes
No hams read instructions we already know everything :-)
Photo of Gary L. Robinson

Gary L. Robinson

  • 237 Posts
  • 46 Reply Likes
Some of us hams do read the instructions ...  but ONLY years later hihi

---Gary WB8ROL
Photo of Jay / NO5J

Jay / NO5J

  • 1514 Posts
  • 222 Reply Likes

Which is how hams find out what they don't know, but should. 

And might not remember next time.

#FlexRadio IRC chat

   73, Jay - NO5J