multiple wsjt-x

  • 1
  • Question
  • Updated 2 years ago
  • Answered
Is there any mean to run multiple JTAlerts binding to each WSJT-x's running?
Thanks to FT8, Low band activities are very high and I am enjoying multiple WSJT-x operation for 80, 40 and 30m.  Currently, I am using JTAlert for one instance of WSJT-x and the rest of WSJT-x's are subject to eye watching and not so effective - I cannot examine 2 windows in detail in 15 sec.
How other multiple WSJT-x users are managing the operation?

Ken Yamada
Photo of Takeshi Yamada

Takeshi Yamada

  • 172 Posts
  • 51 Reply Likes

Posted 2 years ago

  • 1
Photo of KB4AAA


  • 47 Posts
  • 20 Reply Likes
You can simply dbl click the Jtalert icon on your desktop for each additional instance of WSJT-X or you can also setup the auto start within Jtalert here is my setup opens (3) WSJT-X and Log40m plus (3) Jtalert. It works very slick Jtalert handles the logging interface between WSJT-X and Log40m on all 3 slices and I run slice 4 as ssb and use Log40m window to log contacts on the fly. And the flex will auto switch TX to whichever slice that needs to transmit. 

add to the wsjt-x parameters for slice 2 & 3

optional if you use Log40m for logging. In the setup of each WSJT-X you need to set the UDP server port number different on each instance and Jtalert will handle the rest . Here is my setup

Slice A: UDP 2237

Slice B: UDP 2238

Slice C:UDP 2239
Photo of Takeshi Yamada

Takeshi Yamada

  • 172 Posts
  • 51 Reply Likes
Thank you for your advice.
I could now run 3 instances of WSJT-Xs and JTAlerts and jump to any of three bands for transmit.  I am waiting for v2.X CAT supporting Slice: TX slice - I think v1.X supports it already - for Logger32.

Ken Yamada, JI1BNU

This conversation is no longer open for comments or replies.