maestro no radio shown

  • 1
  • Problem
  • Updated 3 years ago
  • Solved
  • (Edited)
When I start up my Maestro/6500, the 6500 will not appear in the the Maestro Panel so I cannot connect too it. It did work when I received the Maestro. It's running Ver 1.8.4 and wasn't exposed to ver 1.8.3. I can run the 6500 via the computer. The Maestro connects to the wireless system with no problem but at the next stage where it ought to find the radio, all I have is a grey panel with nothing in it. I have tried changing Network leads etc. It's just the Maestro connected to the 6500. Any Ideas? I am beginning to regret my investment in the Maestro front end.
Bill
Photo of Bill

Bill

  • 42 Posts
  • 2 Reply Likes

Posted 3 years ago

  • 1
Photo of Bill

Bill

  • 42 Posts
  • 2 Reply Likes
Official Response
Thanks for all of your help but it's now fixed. I raised a ticket with Dudley and with the usual Flex service, he came back to me with something to try very quickly. What he suggested and it worked was to turn off the Wireless Connectivity and restart everything but only with a wired connection. After a couple of tries, it all started to work as it should. I have restarted the system a number of times through the day and it has worked every time. I have now reconnected the wireless network and again, restarted the system a number of times and it all works as it should. I wasn't using the WiFi for a connection but only to watch for updates to the software. It looks as if the 2 networks were conflicting with each other. Dudley referred to it as resetting the system.  Thanks to everyone for their suggestions. 73, Bill - G4ERV
(Edited)