Link Slices (Manual Diversity)

  • 1
  • Question
  • Updated 4 years ago
  • Answered
Is there a way to link two slices together in the 6300? I would like to be able to lock the two slices to the same frequency as I move about the band, so I can have each one in a different receive antenna, giving me a sort of manual diversity reception. 

I know that the 6700 is capable of diversity reception, but I would like a poor man's version of diversity on my 6300.

Thank you,

Eduardo Carvalho, KC8R
Photo of Eduardo Carvalho - KC8R

Eduardo Carvalho - KC8R

  • 79 Posts
  • 7 Reply Likes

Posted 4 years ago

  • 1
Photo of Ken - NM9P

Ken - NM9P

  • 4239 Posts
  • 1351 Reply Likes
Official Response
Unfortunately, you cannot listen to two antennas at the same time, even though you have two slices, because they are both fed by the same SCU (receiver unit).  You CAN connect two different antennas, one to each port, but the only way to do poor man's diversity is to manually switch back and forth between the two, or as Bob said, try to combine the two antennas together, Which is a very uncertain task, because of phase differences between the two antennas.  Using two slices would make no difference, because when you change the antenna input on one, it changes it on the other.  The new transmitting profiles allow you to define a different TRANSMIT antenna for each slice, but they will use the same receive antenna unless you change them manually.  In that case, it would be best simply to toggle the antennas on the same slice.

I have had some success with quick switching antennas to decide which one hears the best for any particular station.  But to get any kind of real diversity, you will need a 6700 with two SCU's.

Ken - NM9P