JT65 AND MOX

  • 1
  • Question
  • Updated 3 years ago
Have had the 6300 for over a year and have used WSJT-X all of that time.  Windows 7 computer and mini-deluxe HRD interface.  Just did a clean reinstall of Windows 7 on the dedicated computer for the rig and everything is working except...WSJT-X will not release MOX after 48 seconds.  The signal does end at the appropriate time but it will not return me to RX and I have to do it manually.  I have no other 3rd party communication or logging programs running at the same time.  I recall this happening about a year ago but forgot how I solved it.  
Photo of Mark Gottlieb

Mark Gottlieb

  • 99 Posts
  • 3 Reply Likes

Posted 3 years ago

  • 1
Photo of Jim Gilliam

Jim Gilliam

  • 913 Posts
  • 212 Reply Likes

Sorry, I can't help you as I don't have that problem with my 6500. However, I hope you will post what the solution is so others can use the info should the problem arise. Thank you.


Jim, K6QE

Photo of Al K0VM

Al K0VM, Elmer

  • 606 Posts
  • 102 Reply Likes
Mark,
  What methode are you using to activae the PTT ( MOX ).?  VOX, RTS/DTR, or CAT ?
is CAT functional ?
Al, K0VM
Photo of Mark Gottlieb

Mark Gottlieb

  • 99 Posts
  • 3 Reply Likes
I am using CAT in WSJT-X.  
Photo of Al K0VM

Al K0VM, Elmer

  • 606 Posts
  • 102 Reply Likes
I forgot to ask...  What do you have set for RIG ?

AL, K0VM
Photo of Mark Gottlieb

Mark Gottlieb

  • 99 Posts
  • 3 Reply Likes
Ham Radio Deluxe.  I am using Mini-Deluxe instead of the full HRD radio pane.
Photo of DrTeeth

DrTeeth

  • 1687 Posts
  • 389 Reply Likes
I used Classic shell on Win 10, but still dumped it.
Photo of Mark Gottlieb

Mark Gottlieb

  • 99 Posts
  • 3 Reply Likes
I downloaded the 1.7 but just get 4 choices of CMD screens.  What is the secret to getting the software to open?
Photo of DrTeeth

DrTeeth

  • 1687 Posts
  • 389 Reply Likes
It behaves no differently to 1.6. Have you installed JDSDK? Basically, it can produce an installation file (I would use that to start off with as it will create the environment 1.7 will need just in case it is wildy different from 1.6. Then you can create just the folders, which I then copy across to the main/working WSJT-X folder.

Can you post a screenshot of the "4 choices of CMD screens" as I am not clear on what you mean?
Photo of Mark Gottlieb

Mark Gottlieb

  • 99 Posts
  • 3 Reply Likes
Photo of Mark Gottlieb

Mark Gottlieb

  • 99 Posts
  • 3 Reply Likes
These are the four folders that appeared after the download of WSJT-x 1.7