• 2
  • Question
  • Updated 1 year ago
  • Finally got the IOS SDR app on the Ipad, but can't connect to the Flex 6400. I can connect with the PC via ethernet and a switch, and the Ipad connects to the internet wirelessly OK, but when I use the panadapter/discover buttons, all I get is a swirly. The Flex shows as available, with the correct IP address, but doesn't connect. It's obviously something I have done, but don't know what. Flex is version 2.3.9, Ipad is ver 12.0, IOS sdr is ver 2.6.2. I've looked at the router settings, all seem normal, but I'm a networking amateur.
Photo of John KB4DU

John KB4DU

  • 168 Posts
  • 41 Reply Likes

Posted 1 year ago

  • 2
Photo of mikeatthebeach .

mikeatthebeach .

  • 486 Posts
  • 84 Reply Likes

Click on the settings in IOS SDR
(Lower Right Corner)
Next select Check Smartlink Status

From there you need to log Into Smartlink

If successful then IOS SDR should
Allow you to bring up IOS SDR

Do this all within your LAN network

First to check things out (Not WAN)

Once the Server recognizes your
iPhone you can try WAN as long as
Your router is setup properly
(Green Light ) for UPnP to setup
Ports with your router to allow
WAN access

73 Mike
Photo of John KB4DU

John KB4DU

  • 168 Posts
  • 41 Reply Likes
Belated thanks to Mike. Ipad is working well for remote.