SmartSDR v3.7.4 and the SmartSDR v3.7.4 Release Notes | SmartSDR v2.12.1 and the SmartSDR v2.12.1 Release Notes
SmartSDR v1.12.1 and the SmartSDR v1.12.1 Release Notes
Power Genius XL Utility v3.8.8 and the Power Genius XL Release Notes v3.8.8
Tuner Genius XL Utility v1.2.11 and the Tuner Genius XL Release Notes v1.2.11
Antenna Genius Utility v4.1.8
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.
icom 2m-8 mic Flex-5000
I am configuring an adapter cable for a Icom SM-8 Desk Mic to Flex front Microphone plug.
icom pinout
1 Mic V+
2 +Vc
3 Mic freq +/-
4 Up/Dn
5 Ptt
6 Ground Ptt
7 Ground (mic)
8 Mic AF
Since Pins 1,3,4 are not used I gather I will need to bridge a resistor from Pin 2 to Pin 8 for the Mic bias voltage.. The thing that I want to make sure of is the grounds. I think all I will need to do is make an adapter with a 2k ohm resistor across Pin 2 to 8. pins 1,3,4 are not used, and I will be in business.
The flex manual pinout is
1. not connected
2 +5vdc
3 not used
4 not used
5 Chassis ground
6 Ptt+
7 Mic (-)
8 mic (+)
I found a link on how to make the heil ic headset which runs on the Icom radios as connecting pin 5 & 7 to shield of the microphone wire. Don't quite understand what they mean.. http://kc.flexradio.com/KnowledgebaseArticle50372.aspx
Sincerely
Brent K5EDI
Answers
-
I figured out the pinout, the sm-8 element gets its voltage from pin 2 +vdc rather than a different wire. I just made an adapter so I would not have to change the icom plug. Note, this is different than a heil headset which has a phantom voltage.. There are many forums which tended to get me very confused. This will likely work on other icom mic's if the schematic is similar. And it works very well on the Flex, had to turn down the gain quite a bit..
sm-8 manual : https://www.manualslib.com/manual/953851/Icom-Sm-8.html
Flex 5000 front plug pins Icom sm-8 pins
not connected
2
Not connected
Not connected
Ptt - 6
Ptt 5
Mic (-) 7
Mic (+) 1
Prosise
K5EDI
0
Leave a Comment
Categories
- All Categories
- 250 Community Topics
- 2.1K New Ideas
- 489 The Flea Market
- 7.4K Software
- 5.9K SmartSDR for Windows
- 135 SmartSDR for Maestro and M models
- 332 SmartSDR for Mac
- 241 SmartSDR for iOS
- 224 SmartSDR CAT
- 161 DAX
- 344 SmartSDR API
- 8.6K Radios and Accessories
- 6.9K FLEX-6000 Signature Series
- 779 Maestro
- 42 FlexControl
- 836 FLEX Series (Legacy) Radios
- 732 Genius Products
- 392 Power Genius XL Amplifier
- 254 Tuner Genius XL
- 86 Antenna Genius
- 224 Shack Infrastructure
- 151 Networking
- 375 Remote Operation (SmartLink)
- 119 Contesting
- 586 Peripherals & Station Integration
- 116 Amateur Radio Interests
- 810 Third-Party Software