flex 3000 "winlink express" SCS PTCIIpro

  • 1
  • Question
  • Updated 8 months ago
I am feeling frustrated trying to interface my Flex-3000 with "Winlink Express" software using a pactor SCS PTCIIpro.  Winmor not of interest.

I have read and studied Flex information on the web repeatedly.

Any step by step help/procedures appreciated.  73, Jack, N1BIC
Photo of Jack A. Speer

Jack A. Speer

  • 1 Post
  • 0 Reply Likes
  • frustrated...

Posted 8 months ago

  • 1
Photo of Dudley - WA5QPZ

Dudley - WA5QPZ, Elmer

  • 230 Posts
  • 37 Reply Likes
Make sure you lower your audio buffer sizes to reduce turnaround latency . This will increase you CPU usage through, try not to go over 60% cpu usage. Are you getting it to send OK, just not getting recognized by the responder?

Dudley
Photo of Alex - DH2ID

Alex - DH2ID, Elmer

  • 979 Posts
  • 180 Reply Likes
Please post your setup here:
- What kind of cable are you using between your PC and the SCS PTCIIpro?
- What are you using, a PC or a notebook?
- Your PC to PTC connector? RS232 direct or RS232 to USB adapter?

1. You'll need a good connection to the SCS RS232. Not all adapters work.
2. The audio /PTT cable between the SCS and the Flex3000 connects to the FlexWire. I built it myself.
3. On the Flex-3000 setup you must choose the FlexWire connector

Also please read this article: http://kc.flex-radio.com/KnowledgebaseArticle50422.aspx

Hope this helps.
Vy 73, Alex - DH2ID