DAX audio 2 not assigned to slice 2

  • 2
  • Question
  • Updated 4 years ago
I set up rtty last night and thought I'd try the Stu K6TU method of split which requires DAX transmit audio on channel 2 (slice B).  I looked at DAX control panel and see channel 2 is not assigned to anything 

How do I make channel 2 assigned to slice B?  2 is chosen in the second slice under the flag in slice B

73  W9OY
Photo of Lee

Lee, Elmer

  • 677 Posts
  • 285 Reply Likes

Posted 4 years ago

  • 2
Photo of Tim - W4TME

Tim - W4TME, Customer Experience Manager

  • 9152 Posts
  • 3478 Reply Likes
Is DAX set to channel 2 in the Slice B control panel (flag)?
Photo of Lee

Lee, Elmer

  • 677 Posts
  • 285 Reply Likes
Yes
Photo of Lee

Lee, Elmer

  • 677 Posts
  • 285 Reply Likes
You can see this if you look at the channel 2 I/q. The 2 i/q is connected
Photo of Tim - W4TME

Tim - W4TME, Customer Experience Manager

  • 9152 Posts
  • 3478 Reply Likes
DAX IQ audio is sourced from the panadapter.  Adio stream DAX is sourced from the slice receiver.  Looks like you have two panadapters open and each one assigned to DAX IQ. 
Photo of Tim - W4TME

Tim - W4TME, Customer Experience Manager

  • 9152 Posts
  • 3478 Reply Likes
Check to make sure Windows hasn't done something nutty like grabbed the DAX channel as the default sound device.
Photo of Lee

Lee, Elmer

  • 677 Posts
  • 285 Reply Likes
I guess how you check that is to click the speaker icon in the tray?  The only thing that comes up is the speaker.
Photo of Lee

Lee, Elmer

  • 677 Posts
  • 285 Reply Likes
I figured out how to check  speaker is the default device