CAT Control Error with WSJT-X V1.8.0 r8193 to SSDR 1.10.16

  • 1
  • Problem
  • Updated 8 months ago
Hi folks  I am currently facing a strange effect by using WSJT-X  V1.8.0 r8193 with CAT Control to my FLEX-6300  SSDR V1.10.16.
CAT Settings in WSJT are Kenwood TS2000 9600Bd 8, 2  None
All bands switched in WSJT work correct EXCEPT  20m  14.074 MHz !  In this case the Flex doubles the frequency and jumps to 10m Band to 28.148 MHz. The effect is 100% reproduceable. No work around found.I have tried many different settings (Baudrate, Data Bits etc). Thanks for Help!
Photo of Peter Schudel

Peter Schudel

  • 1 Post
  • 0 Reply Likes

Posted 8 months ago

  • 1
Photo of YV5WZ

YV5WZ

  • 382 Posts
  • 47 Reply Likes
Did you check what frequency WSJT-X has saved for 20m?
Photo of KB4AAA

KB4AAA

  • 41 Posts
  • 19 Reply Likes
Did you try to reset all of the frequencies in WSJT-X. open the settings goto freq tag right click in the working frequencies click reset this will change everything to default values. Also you might want to switch your cat control using the FlexRadio 6xxx rig this is the current preferred rig control for WSJT-X
Photo of Mike va3mw

Mike va3mw

  • 824 Posts
  • 195 Reply Likes
You may want to try a TS-480 as the radio to see if that solves your problem.

73, Mike
Photo of Tim - W4TME

Tim - W4TME, Customer Experience Manager

  • 9148 Posts
  • 3466 Reply Likes
And you may want to upgrade to SmartSDR v1.11 as it has a LOT of fixes in it, including some for CAT.
Photo of Ray Andrews, K9DUR

Ray Andrews, K9DUR, Elmer

  • 238 Posts
  • 61 Reply Likes
I am running SmartSDR v2.1.30 and do not see this problem.  Also, I have the wsjt-x radio set to "FlexRadio 6xxx" & the Network Server set to "localhost:5002". -- 73, Ray, K9DUR