CAT Command ZZMD

  • 1
  • Question
  • Updated 3 years ago
CAT Command ZZMD. My understanding was that most Kenwood commands will work with the 6500.

Logger32 sends a ZZMD6 to the 6500, attempting to put the rig in the RTTY mode. According to the Kenwood CAT command directory, this should set the radio to (FSK) RTTY. In the 6500 CAT directory, the ZZMD6 equates to AM.

So either the Kenwood CAT directory is wrong or the Flex CAT directory is...or heaven forbid,  I am interpreting this info incorrectly!

Either way when a MD6 is sent to the 6500, it puts the rig into the DIGL mode and I want it to go into the RTTY mode!....

Any help?....am I missing something here?

73

Lou N2TU
Photo of Lou N2TU

Lou N2TU

  • 8 Posts
  • 0 Reply Likes

Posted 3 years ago

  • 1
Photo of Chris DL5NAM

Chris DL5NAM

  • 664 Posts
  • 151 Reply Likes
Flex6xxx has a FSK mode?
Photo of Sergey, R5AU

Sergey, R5AU

  • 855 Posts
  • 116 Reply Likes
in circuit description only
(Edited)
Photo of Chris DL5NAM

Chris DL5NAM

  • 664 Posts
  • 151 Reply Likes
... on paper was correct :-(
Photo of Peter Bacon

Peter Bacon

  • 33 Posts
  • 10 Reply Likes
You need ZZMD30 for RTTY mode.
Photo of Lou N2TU

Lou N2TU

  • 8 Posts
  • 0 Reply Likes
Thank you!