Cannot Transmit Using Remote from Laptop - SmartSDR 1.4.0

  • 1
  • Problem
  • Updated 5 years ago
  • Not a Problem
I cannot transmit when using the SmartSDR's 1.4.0 remote capability from my Apple notebook when using parallels. Everything else works just fine. I can run 1.4.0 and can hear received audio just fine when using my Logitech USB headphones. I just can't get my transmitted audio out. 

I have DAX 1 selected both in both pull down panels and the blue DAX is active. I have PC selected for the microphone. In the Sound/Recording section, the USB Logitech headphone is selected as the default microphone. I made sure that it is set to 48000. When I talk into the Logitech microphone, I can see the bars move beside it in the Sound/Microphone section.

After raising the RF Power to about 5 watts out and hitting the MOX button and talking into the microphone, I see no audio being transmitted out of the radio and nothing reflected in the panadapter showing modulation.

What am I doing wrong? Any suggestions would be appreciated. Thanks!

Photo of Gary Robertson - KY5R

Gary Robertson - KY5R

  • 79 Posts
  • 2 Reply Likes

Posted 5 years ago

  • 1
Photo of George Molnar, KF2T

George Molnar, KF2T, Elmer

  • 1699 Posts
  • 631 Reply Likes
Official Response
Remote Audio doesn't use DAX. You can turn it off.