Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?

SmartSDR v3.9.19 and the SmartSDR v3.9.19 Release Notes
SmartSDR v2.12.1 and the SmartSDR v2.12.1 Release Notes

The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Anyone using Ham Plus switches?

Options
Member ✭✭
edited February 2019 in FLEX-6000 Signature Series
Ham Plus has an impressive set-up of antenna switches. Even for 6 x 3 and up to 8 x 4 that more and more contest stations are using. Even some high class Flex users. Their port isolation is very good as well. Anyone that have experience to share how well they work with BCD decoding and their external "push button"  controllers with remote software? 

Welcome!

It looks like you're new here. Sign in or register to get started.
Sign In
Register

Answers

  • Member ✭✭✭
    edited January 2019
    http://www.hamplus.com link for the lazy :)
  • Member
    edited January 2019
    Hi Keri, I had use the Hamplus systems for a few years and they are fantastic, quality, isolation, power support,  I have a flex 6700 works perfectly with CAT, the controller. model I use is the MBD8E, but I know everyone has Flex Radio support.

    do not worry you're making a great choice.


    are the best antenna switch I've ever had!


    Best Regards.
    PP5RX
  • Member
    edited January 2019
    Kari,  I use the Hamplus 4x8 with Green Herron wireless controller.  It works great - clearly more capability than I need, but sure was a nice addition to my station.  I mounted it on a wall, which made all my cabling neat, clean, and easy to access.   Having the 4x8 took care of my Flex 6700 (A and B)  and allowed me to connect two other radios as well.
  • Member
    edited January 2019
    The way I read their documentation, it says:
     "The operation is individual, which means that only the selected radio will have access to the antennas."  That means no SO2R or Multi-Multi radio use.  Not like the Array Solutions 2x6 or Antenna Genius.
    73,
    Bill, NE1B
  • Member ✭✭
    edited January 2019
    Hi Thomas, thanks for the input. Do you use your Ham PLus with 6700 + MBD8E now? 73 KAri 
  • Member ✭✭
    edited January 2019
    Mike, thanks. Is there holes in back for wall mount? Have you tested it for SO2R? See comment from Bill below. 
  • Member ✭✭
    edited January 2019
    Thanks Bill - oops I did not think of this. Needs to be checked up. 73 Kari
  • Member ✭✭
    edited January 2019
    I checked with K9CT and Jeff at Green Heron and they use the 4 x 8 with SO2R with great sucess. So clearly it works. From Ham Plus they say that they support all contest modes.

Leave a Comment

Welcome!

It looks like you're new here. Sign in or register to get started.
Sign In
Register

Quick Links

Categories