6300 Flashing green led, will not power up

  • 3
  • Problem
  • Updated 3 years ago
  • Solved
We had a power outage yesterday and since then my 6300 will not start up, the green led just keeps flashing, have tried to factory reset but no luck, if I hold the power button in the most it will do is change colour to flashing white/grey. Have removed all connections and dc power for a good 2 hours, as soon as power is connected we go right back to flashing green led.

Help.....
Photo of Rob G6EIH

Rob G6EIH

  • 102 Posts
  • 12 Reply Likes

Posted 3 years ago

  • 3
Photo of Tim - W4TME

Tim - W4TME, Customer Experience Manager

  • 9152 Posts
  • 3479 Reply Likes
Official Response
There seems to be a timeout situation happening on some 6300s.  When the radio is booted up, after a few minutes, the radio is still showing a flashing green power LED.  If the radio is shut down by pressing and holding the power button until it shuts down, then immediately powered back on with a single press and release of the power button (not a press and hold), then the radio will start up normally.  We are actively investigating this behavior to determine root cause.