Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
The latest SmartSDR Software:
SmartSDR v4.2.20 | SmartSDR v4.2.20 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software:
The latest 4O3A Genius Product Software and Firmware
How to Receive Technical Support::
If you are needing assistance with FlexRadio products, please refer to the product documentation or check the Help Center for known solutions. Need technical support from FlexRadio? It's as simple as creating a HelpDesk ticket.

Flex 8600M 100Hz off frequency on WSJT-X and CW.

Options
Steve Zumbrun
Steve Zumbrun Member ✭✭
in FLEX-8000 Signature Series

I have a rather new Flex 8600M with the GPSDO upgrade. Today I was on WSJT-X with friend who also owns Flex 8600M. We noticed that we were about one hundred Hz off frequency. He also has the GNSS. Both radios were connected to satellites via the GPS with the on button turned blue and my radio GPS status was "Fine Lock". We noticed that we were about 100 Hz different in frequency in FT8 and CW. My friend made contacts with a couple of other hams and their frequencies were very close, so it looks like my radio is off by about 100 Hz. I listened to WWV on 10MHz and my radio seemed to be on frequency. I am using SDR version 4.2.20. Anyone have any ideas for me and or things to check. Thank you. Steve W0SZ.

Answers

  • KD0RC
    KD0RC Member, Super Elmer Moderator
    Options

    Hi Steve, first, check to be sure that your XIT and RIT are turned off. If that is not it, make sure that your 10 MHz Source is set correctly (GNSS or GPSDO) and that it is locked.

    image.png image.png
  • Steve Zumbrun
    Steve Zumbrun Member ✭✭
    Options

    Thank you Len for your help. Much appreciate your help. 73

  • KD0RC
    KD0RC Member, Super Elmer Moderator
    Options

    Glad to help Steve! What did the issue turn out to be?

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories