Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?
SmartSDR v4.1.5 | SmartSDR v4.1.5 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Starting Point Receiver Settings For FT8 On 6400

N3PS
N3PS Member ✭✭
in SmartSDR for Windows

Any words of wisdom for the starting point receiver settings for operating FT8?

I currently have NB, NR and ANF disabled. AGC is set at MED, and the slider at 60.

I realize that everything is band and band condition dependent, but is the above a good starting point ?

Tagged:

Answers

  • Al K0VM
    Al K0VM Member ✭✭✭

    Yes, that's a good starting point. Others have different habits, but I run my AGC lower, at about 20.. Just enough to get green on the WSJT level indicator on Antenna noise. The thing to remember is that the WSJT decoders are very forgiving when used with the FLex. They don't need any help from radio processing.

    AL, K0VM

    100,000 TF8 Qso's

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories