Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
The latest SmartSDR Software:
SmartSDR v4.1.5 | SmartSDR v4.1.5 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software:
The latest 4O3A Genius Product Software and Firmware
How to Receive Technical Support::
If you are needing assistance with FlexRadio products, please refer to the product documentation or check the Help Center for known solutions. Need technical support from FlexRadio? It's as simple as creating a HelpDesk ticket.

Flex 8400M

Roger
Roger Member ✭✭
edited October 2025 in FLEX-6000 Signature Series

My recently aquired 8400M shows S3 on the Smeter with no antenna or a dummy load.

Is this correct? and why?

Thanks Roger G0IUW

Answers

  • Trucker
    Trucker Member ✭✭✭✭

    Normal. It is the internally generated noise level of the ADC's. ( Analog Digital Converter)

    It has no effect on the correct level ( S meter readings) of the meter with the antenna connected.

    James

    WD5GWY

  • KD0RC
    KD0RC Member, Super Elmer Moderator

    Hi Roger, Yes, as James said, that is normal. As an experiment, narrow the bandwidth significantly, and you will see the no-signal S meter reading go down. If I have an S6 noise level with a 3 KHz filter, I get an S3 reading with a 50 Hz filter. It is the total energy in the passband that is calculated to get an S meter reading.

  • Roger
    Roger Member ✭✭

    Thanks Guys for the useful info… I,m grateful

    Roger G0IUW

  • n0ypd
    n0ypd Member ✭✭

    I have the same thing. Glad someone asked.

  • John KB4DU
    John KB4DU Member ✭✭✭✭

    The flex accurately indicates the signal level at the antenna terminal, compared to most other radios that indicate something based on the signal level somewhere in the I.F. Chain, and are usually not linear.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories