Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?
SmartSDR v4.1.3 | SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

FMH-3 Microphone will not PTT

Rapidrob
Rapidrob Member ✭✭
in SmartSDR for Maestro and M models

The FHM-3 microphone stopped working during a QSO. There was no PTT closure.

I opened up the mic and found the PTT microswitch is stuck in the Open condition and will not Close. No click to be heard. I removed the PCB and Ohmed out the three pins on the back of the board (see photo) and there is never a switch closure.

The microswitch is broken. Is there a source for a replacement microswitch? The switch is not marked. A maker's mark or a seller on-line?

Thank you.

I tried to post a photo (.jpg) and this site will not allow it.

Comments

  • VE7ATJ_Don
    VE7ATJ_Don Member ✭✭✭✭

    hi Rob(?)… when this happened to me, I contacted the sales department @ Flex via email, and they were able to sell me another FHM-3 at very reasonable cost.

  • VE7FM
    VE7FM Member ✭✭

    Mine broke after about 10 minutes of use.

    I replaced the switch with a TE Connectivity SAJ405XHL0N30SDTLRQ

    Digikey has stock.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories