Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?
SmartSDR v3.9.19 and the SmartSDR v3.9.19 Release Notes
SmartSDR v2.12.1 and the SmartSDR v2.12.1 Release Notes
The latest 4O3A Genius Product Software and Firmware
SmartSDR v3.9.19 and the SmartSDR v3.9.19 Release Notes
SmartSDR v2.12.1 and the SmartSDR v2.12.1 Release Notes
The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.
Querying the Radio for connected MultiFlex Clients
dm7hb
Member, Unconfirmed ✭
in SmartSDR API
Hi everyone!
I am starting to look into the TCPIP API to contribute to the Wavelog integrator tool (https://github.com/tnxqso/wave-flex-integrator).
We ran into the issue that the tool needs to be able to track a certain SmartSDR GUI client, as we might have multiple users connected via MultiFlex.
I looked through the API and tried a few things, but I can't seem to find the correct command to query the connected clients. (I am especially interested in the station name to provide a drop-down like in the CAT/DAX Tools).
Once a client (dis)connects, I automatically receive the status update message, but isn't there a way to query the radio?
Thanks for helping a newcomer!
73,
Fabian DM7HB
I am starting to look into the TCPIP API to contribute to the Wavelog integrator tool (https://github.com/tnxqso/wave-flex-integrator).
We ran into the issue that the tool needs to be able to track a certain SmartSDR GUI client, as we might have multiple users connected via MultiFlex.
I looked through the API and tried a few things, but I can't seem to find the correct command to query the connected clients. (I am especially interested in the station name to provide a drop-down like in the CAT/DAX Tools).
Once a client (dis)connects, I automatically receive the status update message, but isn't there a way to query the radio?
Thanks for helping a newcomer!
73,
Fabian DM7HB
0
Best Answer
-
If you subscribe to the status messages, "sub client all", you will get the initial client info on the subscription command and then any changes in clients will be broadcast as status messages.
Alan. WA9WUD
0
Answers
-
Hi Fabian, Here is a link to my Github where I do that in my FlexRepeaterSpots and Flexicraft Utility apps.
Go to the releases section of the Github page to find the executable and source code (C#, dotNet, FlexLib). Hopefully, this will point you to what you need. If not, post back here and I will do what I can to help.
0 -
Hi both of you,
Thank you for that very fast response! "sub client all" is what I was looking for, thanks!
@Len, thank you for the links, I will take a look at those, they will be surely very helpful :)
73,
Fabian0
Leave a Comment
Categories
- All Categories
- 336 Community Topics
- 2.1K New Ideas
- 604 The Flea Market
- 7.9K Software
- 6.2K SmartSDR for Windows
- 169 SmartSDR for Maestro and M models
- 400 SmartSDR for Mac
- 263 SmartSDR for iOS
- 247 SmartSDR CAT
- 185 DAX
- 371 SmartSDR API
- 9.1K Radios and Accessories
- 17 Aurora
- 182 FLEX-8000 Signature Series
- 7.1K FLEX-6000 Signature Series
- 913 Maestro
- 53 FlexControl
- 857 FLEX Series (Legacy) Radios
- 883 Genius Products
- 448 Power Genius XL Amplifier
- 319 Tuner Genius XL
- 116 Antenna Genius
- 280 Shack Infrastructure
- 196 Networking
- 441 Remote Operation (SmartLink)
- 137 Contesting
- 740 Peripherals & Station Integration
- 137 Amateur Radio Interests
- 950 Third-Party Software