Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?


SmartSDR v4.0.1 and the SmartSDR v4.0.1 Release Notes

SmartSDR v3.10.15 and the SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Can Confirm 6000 series ATU works FB in 8000 series

Ken Hansen
Ken Hansen Member ✭✭
in FLEX-8000 Signature Series

I just received my new 8400 radio, and in preparing to sell my 6400 w/ ATU I decided to see if I could transfer the field-installable 6000 series ATU into my new 8400. Short answer: Yes!

I followed the Flex 6000 series install PDF in reverse, and soon the ATU board was on the workbench, along with 4x standoffs (the ATU was installed at the factory and included four standoffs, the upgrade kit only includes three, as I understand.)

IMG_3388.jpeg


Then, I simply followed the 6000 series ATU install procedure, taking a moment to marvel at the insides of my new radio. (I installed all four stand-offs, one of which is merely holding up the plate the ATU is on. By installing all four standoffs it provided me with the needed **** to attach the ATU plate to the back of the radio chassis.)

IMG_3394.jpeg

I hooked up power, antenna, and Cat5 into my laptop running 3.8.19 of SSDR, and voilá! Success!

IMG_3395.jpeg



So, since Flex clearly states the ATU is suitable for both 8000 and 6000 series radios, now you have confirmation that the swap is easily accomplished.

I hope some folks find this helpful - I'm very happy to not have to buy another ATU for my 8000 series radio.

Ken, N2VIP

Tagged:

Comments

  • Neil D Friedman N3DF
    Neil D Friedman N3DF Member ✭✭✭✭

    That’s good news since the GPSDO is not transferable.

  • KD0RC
    KD0RC Member, Super Elmer Moderator

    Nicely presented Ken! I would have been very surprised if the existing ATU didn't fit the 8000 series, but it is nice to see it confirmed.

  • Ken Hansen
    Ken Hansen Member ✭✭

    I am curious why one word in my post was replaced with "****" - I simply used a common term for a threaded attachment, they come in two varieties, standard and phillips… oh well.


    Thanks for the kind words.

  • David Decoons, wo2x
    David Decoons, wo2x Member, Super Elmer Moderator

    The Community software is weird

    Blank you. The word you got **** can be used in place of blank and offensive. Better to bleep words than to offend people. My last name technically has a space between the e and c. The second half of my last name could be considered as a derogatory word. Oh well…

    Dave wo2x

  • Erik Carling EI4KF
    Erik Carling EI4KF Member ✭✭✭✭

    or several of a ringed bushy tailed cute creature…

  • KØFUZ
    KØFUZ Member ✭✭

    Just the info I needed - thanks.

    Three Q's.

    1. When you upgraded was every thing else just unplug the old and plug in the new?
    2. How much did you sell your 6400 for?
    3. Did you notice a big difference with the 8400?

    Thanks - John KØFUZ

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories