Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?


SmartSDR v4.0.1 and the SmartSDR v4.0.1 Release Notes

SmartSDR v3.10.15 and the SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Maestro C and INRAD M-629/DMS-1 Base

W5JWP
W5JWP Member ✭✭
in Maestro

I recently bought the following from FlexRadio to use with my Maestro C:

INRAD M-629 with DMS-1 Base https://www.flexradio.com/products/inrad-dms-629-desk-microphone/

INRAD DM-F Adapter Cable https://www.flexradio.com/products/inrad-dm-f-3-5mm-rca-cable/

Microphone keying from the INRAD base works fine with the Maestro C, but not the microphone audio. I have tried every combination of adapters and settings I can think of, and I simply cannot get any audio to pass! The instructions read that this should be as simple as connecting the TRS connector on the DM-F adapter cable to the microphone side of the Maestro Y cable… but no dice.

The FHM-3 hand mic works great, but I prefer the desktop microphone. That, and, after paying over $200 for the microphone, base, and adapter cable, it would be nice to have something more than a paperweight 🤣

Has anyone able to make this combination work or suggest what might be going wrong?

Answers

  • Tom C
    Tom C Member ✭✭

    that occasionally happens th me and last time it was because I somehow switched the switch on top of the mic off, I never use it but…

    The only other thing I’ve done is to be in the digu mode instead if USB.

    Tom

    N9RU

  • KD0RC
    KD0RC Member, Super Elmer Moderator

    I think that the problem is that the Maestro C takes a TRRS (CTIA standard) plug, not a TRS plug. I think that you also need another Y cable to break out the mic and headphones, but I am not sure. I would contact the Flex Help Desk, they will know what you need.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories