Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

PGXL and Kenwood TS-890

Hello everyone,

I always use the Flex-6700 and connecting to the PGXL via LAN is very easy. I have a Kenwood TS-890 for a few days and I have a problem with the cooperation of this 3 with the PGXL. Kenwood has an RS232 port but I had to use it to connect the ATU PA0LL controller. Connection via RS232 cable via Y-splitter is not possible. All that remains is to work via RF-Sense. But maybe there is some other way to connect the TS-890 to the PGXL so that it switches automatically? The TS-890 is connected to the LAN. It is also connected to the computer via a USB cable which creates two virtual serial ports. Any advice is welcome.

73's

Slawomir😉

Comments

  • Member ✭✭

    I'm sorry for my mistake. It's about combining trx with PGXL.

Leave a Comment