Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?
SmartSDR v4.1.3 | SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Canadian Turf File For 3.4.21 ??

Karl
Karl Member ✭✭
in SmartSDR for Windows

Hi.

Could some one tell me how i get the Canadian Turf file for 60m.

I see it's part of the 3.4.21 upgrade but i'm not sure how to get the file or choose the region.


Thanks

Karl.

Answers

  • Karl
    Karl Member ✭✭

    As per the Flex Facebook Site how does one apply to get the Turf File ??

    Thanks

    Karl

    • Michael Walker
    • Admin
    • Group expert
    • +1
    • The new 60 metre band is in addition to our existing fixed-frequency allocations at 5332, 5348, 5373 and 5405 kHz. The new 15 kHz-wide allocation overlaps our existing authority to use 5358.5 kHz. Canadian Amateurs are unique in having authority to use 100 watts ERP on the four spot frequencies and on the new 15 kHz worldwide segment. Amateurs in most countries are limited to 25 watts or less and may operate only in the new 15 kHz-wide segment.

    • Jens Flokke
    • Michael Walker You need to have the updated Canadian TURF file to be installed, thats how I understood the RN…

    • Tim Ellison
    • Admin
    • Group expert
    • Jens Flokke that’s correct. A Canadian TURF file will need to be generated specifically for your radio and installed before you have access to the new 60m frequencies


  • KD0RC
    KD0RC Member, Super Elmer Moderator

    Hi Karl, I created a help desk ticket for you.

  • Karl
    Karl Member ✭✭

    Thank You Len much appreciated.

    73,

    Karl, VE6KDX

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories