Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

ATU comes on in v3.3.32

ka9ees
ka9ees Member ✭✭✭

My only problem with 3.3.32 so far is. Every time I change bands the ATU comes on. I never use the ATU. It's useless. How do I disable it? Short of removing it from the rig.

Tagged:

Comments

  • Neil D Friedman N3DF
    Neil D Friedman N3DF Member ✭✭✭✭

    My 6600M doesn’t do that with 3.3.32 (and I find the ATU quite useful). If a cold boot doesn’t help, I suggest a support ticket.

  • ka9ees
    ka9ees Member ✭✭✭

    @Neil D Friedman N3DF

    Did a little testing. The front panel of my 6400M shows a green ATU button. I thought that meant the ATU was active. Apparently not. When I look at the status in SSDR it shows "success/byp/mem". I am running in SmartControlMode. Before the update it didn't show a green button in ATU. It just confused me. It's behavior changed. All is good.

  • Neil D Friedman N3DF
    Neil D Friedman N3DF Member ✭✭✭✭
    edited June 2022

    From Sec 25.3 of the 3-year-old (Sept 2019) 6400M/6600M User Guide: “The ATU button will illuminate in green when a match is found resulting in an SWR better than the match criteria for the band. This includes Bypass mode when the antenna system is well matched.” The match criterion is 1.7:1 on bands other than 6m, where it is 2.32:1.

  • ka9ees
    ka9ees Member ✭✭✭

    @Neil D Friedman N3DF

    What I am saying is. The button was always dark before this update. I don't want it to tune a solid state amplifier. A MercuryIIIS.

  • Pat KØPC
    Pat KØPC Member ✭✭

    Try pressing and holding the ATU button to turn it off completely.

    73, Pat KØPC

  • ka9ees
    ka9ees Member ✭✭✭

    I was advised by a FB administrator to also turn off the memories.

    TNX everybody!

    73 Ed KA9EES

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.