Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
The latest SmartSDR Software:
SmartSDR v4.1.5 | SmartSDR v4.1.5 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software:
The latest 4O3A Genius Product Software and Firmware
How to Receive Technical Support::
If you are needing assistance with FlexRadio products, please refer to the product documentation or check the Help Center for known solutions. Need technical support from FlexRadio? It's as simple as creating a HelpDesk ticket.

QSK time PTT OUT for an interlock use.

Richard B
Richard B Member, Unconfirmed ✭
in Power Genius XL Amplifier
The PTT OUT for the PGXL and TGXL in the latest versions of firmware are different. PG has 10ms and TG has 30ms. Is this right and for a purpose? I use the interlock with my FTDX10.

Best Answers

  • Dan-N7HQ
    Dan-N7HQ FlexRadio Employee, Community Manager admin
    edited June 2022 Answer ✓

    Richard,

    Full disclosure: I'm not as deeply knowledgeable about the TGXL hardware as I am with the PGXL.

    We spent a significant amount of engineering calories ensuring the T/R time was as low as possible on the PGXL. Though 10ms is usually the measured time, there are edge cases where it is longer, therefore the recommended PGXL timing is 20ms for all operations including SO2R.

    The internal switching for the PGXL is simple when compared with the TGXL which is more involved and takes longer to settle. My personal experience running both products simultaneously is a TX Delay of 40ms is adequate.

    73,

    Dan, N7HQ

  • Richard B
    Richard B Member, Unconfirmed ✭
    Answer ✓
    Thank you. All is clear now.
    Rich

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories