SmartSDR v3.3.32 and the SmartSDR v3.3.32 Release Notes | SmartSDR v2.7.6 and the SmartSDR v2.7.6 Release Notes
SmartSDR v1.12.1 and the SmartSDR v1.12.1 Release Notes
Power Genius XL Utility v3.6.24 and the Power Genius XL Release Notes v3.6.24
Tuner Genius XL Utility v1.1.8 and the Tuner Genius XL Release Notes v1.1.8
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.
KAT500 band change fault
Just hooked up my KAT500 and KPA500 to the 6400M. I only have one antenna, an OCF dipole and I went thru all the bands and trained the tuner. Often when I change bands the tuner does not change bands and load the stored memory, then the tuner goes into a fault condition. Reset the fault and tap the key a couple times and usually the tuner retunes and works ok. Sometimes it recalls the stored memory and other times it goes into a tuning cycle. Sometimes I must reset the fault on the tuner, push the tune button on the radio and then the tune button on the tuner and it does a full retune.
Having the amp online does not affect the operation of the tuner. And it does it on both SSB and CW.
I turned the amp on standby to watch the band display and every time I change bands it is correctly shown on the amp's display. But the tuner does not automagically get that band change data and recall the stored memory so when I push the key or ptt the tuner goes into fault. The amp sees the band changes immediately but the tuner does not.
Maybe a timing issue? Does the delay on TX1 affect data going to the tuner? Or is it only for the ptt line to the amp?
Leave a Comment
- 18.5K All Categories
- 133 Community Topics
- 2K New Ideas
- 280 The Flea Market
- 6.2K Software
- 5.4K SmartSDR for Windows
- 93 SmartSDR for Maestro and M models
- 211 SmartSDR for Mac
- 188 SmartSDR for iOS
- 180 SmartSDR CAT
- 116 DAX
- 321 SmartSDR API
- 7.8K Radios and Accessories
- 6.4K FLEX-6000 Signature Series
- 631 Maestro
- 29 FlexControl
- 777 FLEX Series (Legacy) Radios
- 411 Genius Products
- 243 Power Genius XL Amplifier
- 145 Tuner Genius XL
- 23 Antenna Genius
- 119 Shack Infrastructure
- 75 Networking
- 204 Remote Operation (SmartLink)
- 91 Contesting
- 308 Peripherals & Station Integration
- 87 Amateur Radio Interests
- 584 Third-Party Software