Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
The latest SmartSDR Software:
SmartSDR v4.2.18 | SmartSDR v4.2.18 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software:
The latest 4O3A Genius Product Software and Firmware
How to Receive Technical Support::
If you are needing assistance with FlexRadio products, please refer to the product documentation or check the Help Center for known solutions. Need technical support from FlexRadio? It's as simple as creating a HelpDesk ticket.

Equalizer settings for global and transmit profiles

Michael H Reid
Michael H Reid Member ✭✭
edited July 2021 in SmartSDR for Windows

Receiver Flex6500. For each band I set Global Profiles as "10CW", "10DIGU", and "10SSB" and set corresponding Transmit Profiles as "CW", "DIGU", and "SSB". The Equalizer settings are different for operating CW, DIGU, or SSB. However, the Equalizer settings are not preserved when selecting the different Global Profiles. Using SmartSDR v.2.7.6.

Any help greatly appreciated...Mike, K6DRY.

Best Answer

  • Michael H Reid
    Michael H Reid Member ✭✭
    Answer ✓

    Just solved the Equalizer settings problem after finding a prior comment by Tim that the Tx equalizer setting is remembered in the Microphone profile and the Rx equalizer setting is remembered in the Transmit profile. All is now well!!

    Sorry for any confusion...Mike, K6DRY

Answers

  • K0FLY
    K0FLY Member ✭✭✭

    Michael:

    Thanks for your final comment, I had missed the RX equalizer setting in the TX profile. I have been wanting to do this for a long time.


    Gayle K0FLY

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories