Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?
SmartSDR v3.9.19 and the SmartSDR v3.9.19 Release Notes
SmartSDR v2.12.1 and the SmartSDR v2.12.1 Release Notes
The latest 4O3A Genius Product Software and Firmware
SmartSDR v3.9.19 and the SmartSDR v3.9.19 Release Notes
SmartSDR v2.12.1 and the SmartSDR v2.12.1 Release Notes
The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.
Network issue connecting to Antenna Genius
Tim VE6SH
Member ✭✭
All was working fine this morning. I came back to find the computer had rebooted and nothing was connected. Restarted the computer and DAX and CAT took a minute to find the 6600M rather than instantly as usual.
The main issue is the Antenna Genius does not connect to the 6600M. I confirmed the radio address was unchanged in the AG Program. Powering down the network switch causes the AG Program to recognize the 6600M and connects for about 30 seconds and then disconnects. Confirmed power connection to the AG is ok and the LAN light is flashing on the AG. The AG now randomly connects and disconnects to the radio (not an RF issue as I am not transmitting)
Other programs are connecting ok on the LAN (FRStack, DxLab).
Any ideas?
Tim VE6SH
The main issue is the Antenna Genius does not connect to the 6600M. I confirmed the radio address was unchanged in the AG Program. Powering down the network switch causes the AG Program to recognize the 6600M and connects for about 30 seconds and then disconnects. Confirmed power connection to the AG is ok and the LAN light is flashing on the AG. The AG now randomly connects and disconnects to the radio (not an RF issue as I am not transmitting)
Other programs are connecting ok on the LAN (FRStack, DxLab).
Any ideas?
Tim VE6SH
0
Answers
-
and interestingly now neither DAX or CAT are connecting to the radio. The 6600M is only showing as a Smartlink connection on CAT and not on the LAN. DAX is not recognizing the radio. Clearly a networking issue.0
-
OK. It seems AVG upgraded and rebooted the computer. It added an "enhanced firewall" without my consent which was blocking the LAN. All fixed
Tim VE6SH
0 -
I find that I have to must reboot the AG if there is a router or computer reboot. All happy after reboot.
0 -
Yes. I did try that. Turns out AVG added a new firewall. Disabling the “enhanced” feature fixed all the issues.0
Leave a Comment
Categories
- All Categories
- 336 Community Topics
- 2.1K New Ideas
- 603 The Flea Market
- 7.9K Software
- 6.2K SmartSDR for Windows
- 169 SmartSDR for Maestro and M models
- 400 SmartSDR for Mac
- 263 SmartSDR for iOS
- 247 SmartSDR CAT
- 184 DAX
- 371 SmartSDR API
- 9.1K Radios and Accessories
- 17 Aurora
- 182 FLEX-8000 Signature Series
- 7.1K FLEX-6000 Signature Series
- 913 Maestro
- 53 FlexControl
- 857 FLEX Series (Legacy) Radios
- 882 Genius Products
- 447 Power Genius XL Amplifier
- 319 Tuner Genius XL
- 116 Antenna Genius
- 280 Shack Infrastructure
- 196 Networking
- 441 Remote Operation (SmartLink)
- 137 Contesting
- 739 Peripherals & Station Integration
- 137 Amateur Radio Interests
- 950 Third-Party Software