Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?
SmartSDR v4.1.3 | SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Keying an amplifier

Paul F6EXV
Paul F6EXV Member ✭✭
edited June 2020 in SmartSDR for Windows
Hi all
My 6500 is no longer keying my Acom2000a.
Using SSDR version 2.5.1, and on the TXs setup in "Settings" 3radio setup", I do see the 3 TXs, but I see no button to activate them .
Is this normal, or am I missing something somewhere else.

Also, the version I have shows USA for region. I want to change it to France, but do not know where to fing the adequate file.

Thanks for help and 73
Paul F6EXV

Answers

  • Lasse Moell
    Lasse Moell Member ✭✭
    edited September 2019
    Paul,
    the TX1-3 is configured under TX Band Settings...

    The radio is controlled by a TURF file which tells what region you operating in. Not sure why this is corrupted, I would do a full reset to see if ti works. If not, contact Flex and they will send you a proper TURF file that will turn your radio to the correct region
    /Lasse SM5GLC
  • Mack
    Mack Member ✭✭✭
    edited September 2019
    Go to settings, TX Band Settings. Then enable the correct TX port for your amp.


    Place a check mark in the boxes for the bands that your amp supports.

    Contact your dealer or FlexRadio to get the correct TURF file.

    73,

    Mack
    W4AX
    Alpha Team



  • Paul F6EXV
    Paul F6EXV Member ✭✭
    edited June 2020
    Found it, many thanks !
    I sent an email to the Help Desk, and await their reply with the turf file.
    Thanks again +73
    Paul F6EXV

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories