Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?

SmartSDR v4.1.3 and the SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 and the SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Flex 3000 trips switchmode psu but not analogue psu

Michael Holtham
Michael Holtham Member
edited March 2020 in FLEX Series (Legacy) Radios
Why does flex 3000 trip certain power supplies by just connecting dc cable.

Answers

  • Dudley WA5QPZ
    Dudley WA5QPZ Member ✭✭✭
    edited March 2020
    Some power supplies do not have the negative connected to chassis ground, the 3000 has the negative side connected to chassis ground. 73, Dudley
  • Michael Holtham
    Michael Holtham Member
    edited August 2019
    Hi Dudley, so I guess the switched mode psu that only trips with the 3000 has a floating output. BTW it is fine with all my other kit.
  • Dudley WA5QPZ
    Dudley WA5QPZ Member ✭✭✭
    edited March 2020
    Does it trip when you power the 3000 on?
  • Michael Holtham
    Michael Holtham Member
    edited August 2019
    Hi Dudley No it trips as soon as it is connected to the dc cable. Was thinking back emf from a relay but its before switching on. Radio works fine on the old manson psu so its no big problem, just curious. Will meter it up and try the switched mode again. I do appreciate your interest in my issue.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories