Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
The latest SmartSDR Software:
SmartSDR v4.1.5 | SmartSDR v4.1.5 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software:
The latest 4O3A Genius Product Software and Firmware
How to Receive Technical Support::
If you are needing assistance with FlexRadio products, please refer to the product documentation or check the Help Center for known solutions. Need technical support from FlexRadio? It's as simple as creating a HelpDesk ticket.

Flex 6600 SO2R W/ one antenna

Wyatt Law
Wyatt Law Member
edited November 2019 in FLEX-6000 Signature Series
I have a 40m-6m Hex Beam and was wondering on how practical it would be to do SO2R. If I used the Flex 6600, could I call CQ on 20 and look for multipliers on 20 simultaneously with the same antenna without blowing myself out ? Or would I have to be on a differnt band with a bandpass filter? Basically, would the second receiver be blown out from receiving the cq from the transmitter when on the same band with the same antenna, or is there some filtering to prevent this? Thank you

Answers

  • Rick N0VT
    Rick N0VT Member ✭✭✭
    edited November 2019
    SO2R requires two antennas for exactly the reason you mention.  A multiband hexbeam is still a single antenna.
  • Andy - KU7T
    Andy - KU7T Member ✭✭
    edited July 2019
    Same band no. Different bands is doable with triplexer. I saw this at a field day site once and it was amazing. Andy KU7T

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories