Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR, Power Genius, Tuner Genius and Antenna Genius Software?

SmartSDR v3.9.18 and the SmartSDR v3.9.18 Release Notes
SmartSDR v2.12.1 and the SmartSDR v2.12.1 Release Notes
Power Genius XL Utility v3.8.9 and the Power Genius XL Release Notes v3.8.9
Tuner Genius XL Utility v1.2.11 and the Tuner Genius XL Release Notes v1.2.11
Antenna Genius Utility v4.1.8
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

usb port can not turn on DEMI 2mldpa

Member ✭✭
edited June 2019 in FLEX-6000 Signature Series

I  have a new DEMI 2MLDPA set up as an amp...plugged into the 6700 USB port.. when I switch to 2 meters on the Flex, the unit does not turn on...I returned it to DEMI and they tested both the unit and cable and say it works per specs... I tried both USB ports with the same results... any ideas???? running 2.4.9.115 software on Windows Pro

Welcome!

It looks like you're new here. Sign in or register to get started.
Sign In
Register

Comments

  • Member ✭✭✭
    edited June 2019
    This may be a **** question, but have you set the USB connector mode to LDPA in the SmartSDR Radio Setup menu?
  • Member ✭✭✭
    edited June 2019
    Other than connecting dc power and plugging in the usb cable, this is all that is required to make the 2mldpa with remote option to work.


  • Member
    edited February 2019
    Yes in deed... one of the first things I checked right after measuring the voltage at the uniy
  • Member
    edited February 2019
    Obviously there is something more... I think the unit has a wiring error but have no idea what DEMI tested when they certified it was “in spec”.... did they check to see if it turned on remotely??? Beats me... should be plug and play
  • Member ✭✭
    edited February 2019
    Call DEMI and have them walk you through it.
  • Member
    edited February 2019
    ttied that.... they don’t do that but did say everything was set correctly
  • Member
    edited April 2019
    Did you ever get it working?  I have a problem where I can get my LDPA to turn on with Smart SDR, but it will not with my Maestro.
  • Member
    edited April 2019
    Yes... the power plug on the DEMI was faulty and did not make contact with the unit so when I measure voltage at the plug it was good but it did not connect inside the DENI

Leave a Comment

Welcome!

It looks like you're new here. Sign in or register to get started.
Sign In
Register

Quick Links

Categories